C32S-10W

Model
C32S-10W
Function
Vehicle Wireless IP Mesh Radio
Network Scale
64 / 128* / 256* nodes
Frequency Range
500~680MHz / 1300~1500MHz, adjustable in 1MHz steps
70~6000MHz customizable
Anti-Interference
Adaptive frequency selection* , Wideband frequency hopping*
Transmit Power
40dBm (10W: 2x5W) , 1dBm step adjustable
Bandwidth Modes
1.25 / 2.5 / 5 / 10 / 20 / 30 / 40 MHz
Receiver Sensitivity
-103dBm@5MHz
Peak Data Rate
220+ Mbps, @40MHz bandwidth
Communication Range
200+ km (Line of Sight)
Data Interfaces
2x Ethernet, 3x serial (TTL, RS232, RS422, RS485 customizable)
Voice Communication
IP voice conferencing, PTT intercom (PTT handset included)
Security Encryption
DES, AES128, AES256
Power Consumption
15~80W
Transmission Latency
≈7ms
Operating Temperature
-20~+65℃ (standard), -40~+65℃ (customizable)
Dimensions
269x180x64mm
Weight
≈3.30kg

Function and Management Specifications

Item Specification
Intra-network Multicast Supports IP multicast/broadcast, blacklist/whitelist; serial point-to-point & point-to-multipoint multicast
Link Optimization Supports QoS routing and weak link removal for better network stability
QoS Assurance Prioritizes by IP address, protocol+port, DSCP to ensure real-time high-priority services
Internet Extension Any node acts as gateway; all nodes access the Internet via gateway
WiFi AP Provides WiFi hotspot for mobile phones, tablets, laptops (handheld/backpack – optional)
GIS Map Supports GPS/BD positioning, map & topology overlay display (integrated/external)
Operating Temperature -40~+65°C (battery excluded; low-temp battery customizable)
Management Platform WEB_UI, Windows_APP, Linux_APP, Android_APP
Quick Configuration Configure all network nodes via any radio's WEB_UI
Configuration Management Configures frequency, bandwidth, power, IP, key; displays topology, link quality, signal, noise, temperature; remote upgrade & one-key global parameter modification
Status Display WEB_UI shows network topology, noise, signal, distance, rate, time slot usage, temperature
Path Query WEB_UI queries and displays real data transmission path
Video Management WEB_UI accesses and manages multi-channel camera video
Map Display WEB_UI shows real position and node distance on 2D offline map
Alarm Prompt WEB_UI alerts common radio anomalies/faults
Customization Customizable frequency, power, size, interface, protocol, management software

Hardware Platform & Communication Specifications

Item Specification
Hardware Platform SDR platform based on Zynq70XX + AD936X
Network Architecture Distributed centerless wireless IP Mesh ad hoc network; nodes can join/leave dynamically with strong scalability
Network Scale Single frequency supports up to 64 nodes / 128 nodes (optional) / 256 nodes (optional)
Networking Mode Mesh, chain, point-to-point, point-to-multipoint, multipoint-to-multipoint
Communication Waveform COFDM + 2T2R/MIMO (optional) + Dynamic TDMA protocol + Highly dynamic routing protocol
Communication Anti-interference (optional) Supports adaptive frequency selection, wideband frequency hopping to cope with complex electromagnetic environments
Communication Frequency 560–680MHz / 1300–1530MHz / 4200–4400MHz / 4400–5000MHz / 5000–5800MHz (customizable within 70–6000MHz)
Bandwidth Mode (optional) 1.25/2.5/5/10/20/30/40MHz
Carrier Modulation QPSK/16QAM/64QAM/256QAM (adaptive)
Transmission Rate (optional) Diversity: 25+Mbps@10MHz, 50+Mbps@20MHz, 90+Mbps@30MHz, 110+Mbps@40MHz
MIMO: 50+Mbps@10MHz, 100+Mbps@20MHz, 180+Mbps@30MHz, 220+Mbps@40MHz
Receiving Sensitivity -103dBm@5MHz, -105dBm@2.5MHz, -107dBm@1.25MHz
Transmission Delay Average single-hop delay ≈7ms
Multi-hop Capability Over 10 hops
Startup Time Approx. 25 seconds
Mobility Support Over 1000km/h @1.4GHz (Doppler offset compensation: 3KHz@Zynq7020, 6KHz@Zynq7035)
Loop Detection Supports multiple nodes accessing the same switch or LAN for networking
Security Encryption Supports DES/AES128/AES256 encryption for secure data transmission
Spectrum Scan Monitors noise and burst interference to optimize operating frequency
Rate Configuration MCS can be set to adaptive or fixed mode (adaptive by default)
IP Passthrough Transparent IP data transmission between Ethernet, Ethernet-serial, serial-serial
Voice Communication IP voice conference / PTT intercom (standard PTT hand mic for C3S1 handheld & C32S vehicle/backpack)
Note: Items marked with * are optional/customizable features. Adaptive frequency selection & wideband frequency hopping enhance anti-jamming capabilities. Communication range up to 200+ km LOS depending on environment. All specifications subject to real-world performance.

Application Scenarios

Convoy & Vehicle Mesh
UAV Relay & C2 Links
Public Safety & Emergency
Border Surveillance
Industrial IoT / Robotics
Forest Fire / Mountain Comms
Smart City Backhaul
Maritime & Offshore
Typical high-mobility & NLOS environments – supports multi-hop beyond 10 hops, ideal for dynamic tactical networks. Long range LOS capability up to 200+ km.